About Wall Trim Planner
Wall Trim Planner is a free set of single-purpose planners for board and batten, shiplap and other accent walls. It was built by an engineer who got tired of doing batten spacing on the back of a scrap of drywall and still ending up with an odd gap at the end of the wall.
The planner solves for exactly equal spacing with a batten at both ends, works around windows, doors and outlets, and turns the result into a cut list and a shopping list. Everything runs in your browser: there are no accounts, and your measurements are not uploaded.
How the numbers are calculated
On-center spacing is (wall width − batten width) ÷ (battens − 1). Board counts come from packing the actual cut list into your chosen stock lengths, allowing for the saw kerf, plus a safety margin you choose. Paint is estimated from the wall area minus openings plus the edges of the battens. These are planning estimates – always measure twice on site.
What's next
Start with the board and batten planner or the shiplap planner. Companion tools for wainscoting, slat walls, picture-frame molding and gallery-wall spacing are next. Ideas or bug reports are welcome on the contact page.